Tennessee wastewater operator CEU courses
These CEU courses are approved in Tennessee. Watch online at your own pace, pass a short quiz, and download your certificate straight away.
Renewing soon? Get a reminder before your window opens.
On sale now (64)
The Peak You Pay For: Demand Charges
High demand charges can make your plant's electricity bill spike unexpectedly, especially when pumps and motors start at the same time. This hour shows how to recognize demand peaks, understand demand ratchets, and create simple load shedding plans to cut costs without hurting treatment.
Approved in Tennessee
View courseLagoon Levers: What Each Change Costs
Making changes in lagoon operations without knowing their effects can cause poor effluent, sludge build-up, or higher costs. This hour helps you understand how each adjustment impacts the lagoon so you can balance quality, stability, and expenses with confidence.
Approved in Tennessee
View coursePump Energy: Throttling, Heads and Clean Pipe
Pumping more pressure than needed or throttling pumps the wrong way wastes energy and increases costs at wastewater plants. This hour shows how to manage pump head, understand throttling effects, and spot when pipe cleaning saves energy and keeps pumps running right.
Approved in Tennessee
View courseTracer Testing a Contact Tank: t10 and Baffling
Operators often miss hydraulic problems like short-circuiting or slime buildup in contact tanks because they don't know how to run or read tracer tests. This hour shows how to perform tracer studies, interpret T10 and baffling results, and use them to improve disinfection and tank flow.
Approved in Tennessee
View courseThe Records That Win a Bypass or Upset Case
Incorrect or incomplete records during bypass or upset events can lead to permit violations and costly penalties. This hour shows how to keep clear, accurate logs and reports that meet regulations and support your plant's defense in wet weather situations.
Approved in Tennessee
View courseHeadworks: What Gets Past Screens and Grit
Rags and grit that slip past the headworks show up later as plugged pumps, worn equipment and lost tank volume. This hour covers what screens and grit removal really catch, what they miss, and what that costs downstream.
Approved in Tennessee
View courseTrickling Filters: What More Flow Buys and Costs
Operators often face trouble when increasing flow through trickling filters without understanding how it affects recirculation, sludge, and effluent quality. This hour shows how to read plant data and adjust hydraulic rates to keep the filter working well without wasting energy or causing problems.
Approved in Tennessee
View courseClarifier Operation and Troubleshooting
Clarifiers are where many effluent problems first show. This hour covers running primary and secondary clarifiers well and troubleshooting them when they misbehave, along with the common mistakes that turn an upset into a violation.
Approved in Tennessee
View courseRising Sludge or Bulking: Telling Them Apart
Sludge floating on the clarifier can be rising sludge or bulking, and each needs the opposite fix. This hour teaches how to tell which you have before you change anything, and the right first move for each.
Approved in Tennessee
View courseHead: What Your Pump Is Really Working Against
Pumps often run inefficiently because operators don't fully understand the system pressure and losses they work against. This hour shows how to measure total dynamic head correctly and use that knowledge to improve pump performance and spot common system issues.
Approved in Tennessee
View courseThe Daily Round: What To Check and What To Log
Operators often miss or misrecord key daily checks and lab data, risking plant performance and regulatory trouble. This hour shows what to inspect and log each day, how to interpret results, and how to keep accurate records that prove the plant is properly managed.
Approved in Tennessee
View courseActivated Sludge 2: What Each Change Does
Every activated sludge lever changes more than one thing at once. This hour takes each main lever in turn and shows what it does to effluent quality, process stability, sludge production and energy use, so you can decide, and explain the change to your superintendent.
Approved in Tennessee
View courseInspecting an Industrial User: What to Look At
Industrial users sometimes discharge pollutants beyond permit limits, putting the plant at risk and causing potential violations. This hour teaches how to conduct thorough inspections, identify problems, plan sampling, and use enforcement tools to keep industrial users in compliance.
Approved in Tennessee
View courseMaintenance That Finds Faults, Not Just Grease
Just greasing pumps and motors can miss early signs of trouble, leading to unexpected breakdowns and costly repairs. This hour shows how to spot hidden faults using testing tools and proper valve care, so you can keep equipment running smoothly and avoid failures.
Approved in Tennessee
View courseWhat Each Bench Test Measures, and Its Traps
Operators often run bench tests without fully understanding what each one measures or where errors commonly happen, leading to confusing or misleading results. This hour explains the main test types, their usual pitfalls, and how to spot when results may not be reliable before acting on them.
Approved in Tennessee
View courseWhat a Duplicate Can and Cannot Tell You
Duplicates are a useful quality check, but they only tell you so much about your data. This hour covers what a duplicate can and cannot show, the calibration details behind it, and how much confidence your results deserve when you make operating decisions.
Approved in Tennessee
View courseInfiltration or Inflow: Telling Them Apart
Groundwater leaking in and stormwater pouring in look alike at the plant, but they behave differently and have different fixes. This hour shows how to tell them apart on your flow record and what each means at the headworks.
Approved in Tennessee
View courseThe Bench Lab: Which OSHA Rule Covers It
Wastewater bench labs often miss key OSHA rules that lead to unsafe conditions and compliance issues. This hour shows how to identify the right standards, required safety gear, and practical steps to keep lab work safe and meet OSHA's chemical hygiene rules.
Approved in Tennessee
View courseLockout/Tagout for Pumps, Blowers and Mixers
A pump, blower or mixer that restarts or turns over during maintenance can kill. This hour covers locking out and verifying each of these machines, step by step, to OSHA's standard.
Approved in Tennessee
View courseCyber Duties Already in Your Emergency Plan
Operators may miss or hesitate on cybersecurity steps already included in their plant's Emergency Response Plan, leaving the plant vulnerable during an incident. This hour shows where those duties are, what operators must handle, and how to respond confidently when cyber problems arise.
Approved in Tennessee
View courseFalls Into Tanks: The Trigger Is Not Four Feet
Many operators think fall protection rules apply only above four feet, but falls near tanks and hazardous equipment can be just as dangerous. This hour explains OSHA's real requirements, helping you spot risks and use the right guardrails, training, and safety measures to prevent falls.
Approved in Tennessee
View courseWhat Each Cyber Control Actually Stops
Operators often don't know which cybersecurity controls actually protect their plant or how to spot when those controls fail. This hour shows what each control stops, how to recognize problems, and what practical steps to take when cyber issues arise.
Approved in Tennessee
View coursePond Maintenance: Levees, Weeds and Burrows
Weeds, burrowing animals and weak levees are behind many costly pond failures, and all three can be caught early. This hour covers what to inspect, what is the operator's job and what is a design problem, and the routine maintenance that heads off failures.
Approved in Tennessee
View courseThe Lift Station Is a Flow Control, Not a Pipe
In a storm a lift station decides how flow reaches the plant; it is not just a pipe. This hour covers running and maintaining lift stations as flow controls, the regulatory requirements, and what a pump station failure does to treatment and the community.
Approved in Tennessee
View courseCalibrating the Plant Flow Meter: the Annual Job
Flow meters can drift out of calibration over the year, causing inaccurate flow readings that affect plant compliance and performance. This hour shows how to prepare for, perform, and troubleshoot the annual flow meter calibration to keep measurements reliable.
Approved in Tennessee
View courseInsulation Testing: The Megger and the Trend
Electric motors and cables can fail unexpectedly if insulation problems aren't spotted early. This hour shows how to use a megger correctly, read resistance trends, avoid common testing mistakes, and stay safe while checking insulation.
Approved in Tennessee
View courseSystematic or Random: Reading a Meter's Errors
Mistakes in flow meter readings can come from installation issues like blockage or corrosion, not just the instrument itself. This hour shows how to spot different error types, understand calibration needs, and keep meters accurate for reliable monitoring.
Approved in Tennessee
View courseClarifier Capacity: Four Ways to Overload It
Secondary clarifiers can get overloaded in four different ways, each affecting sludge handling and effluent quality differently. This hour shows how to spot these overloads using plant data and make the right operator moves to keep the clarifier working smoothly.
Approved in Tennessee
View courseLocal Limits: The Headworks Calculation
Plants sometimes face trouble controlling pollutants because local limits at the headworks aren't properly calculated or understood. This course breaks down the local limits formula and helps you spot issues, interpret data, and take smart first steps to keep the plant within its limits.
Approved in Tennessee
View courseActivated Sludge Process Control
An activated sludge plant is run with a handful of levers, and the common pitfalls show up in the effluent. This hour covers the main operating levers, the usual mistakes, troubleshooting a process going wrong, and the compliance side of running it.
Approved in Tennessee
View courseDisinfection 3: Judgement at Three Plants
Disinfection isn't always straightforward - three real plants reveal how contact time, residual control, and permit limits can cause tricky decisions in daily operations. This hour helps you weigh those challenges and make smart calls to keep disinfection effective and compliant.
Approved in Tennessee
View courseBloodborne Pathogens: What the Rule Covers
Does the bloodborne pathogens rule apply to wastewater work? This hour covers where OSHA's standard applies and where it does not, how biological hazards differ from chemical ones, and the PPE, hygiene and employer responsibilities that go with it.
Approved in Tennessee
View courseDigester Souring: The Four Numbers and the Cure
Digesters can sour without obvious signs, leading to inefficient gas production and costly downtime. This hour shows how to spot the four key souring indicators, figure out what's causing the problem, and choose the right treatment to get your digester back on track.
Approved in Tennessee
View courseProtecting the Process Through a Peak Flow
A peak flow can wash the biology out of your plant in hours, and it takes weeks to rebuild. This hour covers clarifier limits, the signs of solids washout, and the process-protection steps that keep the plant treating.
Approved in Tennessee
View courseThe Approach Is Part of the Calibration
A flow meter can be calibrated and still read wrong if the channel leading to it is not right. This hour covers how approach conditions affect calibration accuracy, and how to inspect for, identify and correct the errors they cause, especially in wet weather.
Approved in Tennessee
View courseGauges, Thermometers and Alarms You Can Trust
Inaccurate gauges, thermometers, and alarms can lead to false readings and wrong maintenance decisions at the plant. This hour shows how to identify, test, and handle these instruments correctly to trust their readings and keep your system safe and running right.
Approved in Tennessee
View courseChemical Hygiene: Which Rule Your Lab Is Under
Wastewater lab workers often confuse OSHA's Chemical Hygiene standard with Hazard Communication rules, risking noncompliance and unsafe practices. This hour helps you recognize when the Chemical Hygiene Plan applies, read Safety Data Sheets right, and handle lab chemicals safely every day.
Approved in Tennessee
View courseStandby Power: Proved Under Load, or Not Proved
A generator that starts on its weekly test can still fail when it has to carry the plant. This hour covers testing standby power under real load, the common ways it fails, and keeping the plant running through an outage.
Approved in Tennessee
View courseHydrogen Sulfide: Four Numbers, One Ceiling
Hydrogen sulfide has several exposure limits, and mixing them up can put an operator in danger. This hour covers H2S hazards, what each limit means, and the safe practices to recognize, prevent and respond to H2S at a plant.
Approved in Tennessee
View courseWet Weather Operations for Treatment Operators
The overview course for storm season: infiltration and inflow, peak flows at the headworks, protecting the biology, and staying in compliance through the surge. Start here; the other wet-weather courses go deeper on each part.
Approved in Tennessee
View courseReading Your Wastewater Plant's Design Basis
Wastewater operators often confuse plant hydraulic capacities with process design limits, leading to poor compliance decisions. This hour shows how to read design basis documents, understand flow terms, and tell permit limits apart from engineering data for better plant operation.
Approved in Tennessee
View courseFind Your Own Peak: The Energy Survey
Unexpected spikes in energy use can lead to high demand charges and wasted power at wastewater plants. This hour shows how to survey pumps and motors to spot true peak loads and find better ways to save energy during daily operations.
Approved in Tennessee
View courseStorm Modes: What To Switch and When It Is Late
Switching modes too late is one of the commonest storm mistakes. This hour covers which operating modes to change at the headworks and in the plant, the signs that tell you when, and the common timing mistakes.
Approved in Tennessee
View courseThe Lagoon Round: Sludge Depth and the Bottle
Operators often struggle with measuring lagoon sludge properly and missing key inspection steps that keep lagoons running smoothly and safely. This hour shows how to check sludge depth right, handle samples correctly, spot trouble during daily rounds, and stay safe working around lagoon water.
Approved in Tennessee
View courseSolids in the Effluent: Which Failure Is It?
Solids in the effluent during wet weather can come from several different failures, and each needs a different fix. This hour covers diagnosing which one you have before you act.
Approved in Tennessee
View courseSOPs That Exist and SOPs That Get Used
A plant can have a binder full of SOPs that nobody follows. For operators and operators-in-charge, this hour covers the difference between having procedures and using them, and the administration and management practices that affect compliance and day-to-day operation.
Approved in Tennessee
View courseReading Your NPDES Permit: What It Actually Asks
The big-picture one: what your permit requires, in its numbers and its words, and how those requirements become your monthly DMR. (For the detail of rows, units and averaging, see "Rows and Units".)
Approved in Tennessee
View courseReading Sludge Quality: The Five Control Tests
Read one at a time, sludge test results can point you to the wrong lever. This hour covers the five control tests for sludge quality, how their results fit together to guide your next move, and the symptoms and failure modes they reveal.
Approved in Tennessee
View courseDisinfection 2: What the Dose Actually Buys
Changing chlorine dose without understanding contact time and residual levels can lead to missed disinfection targets or wasted chemicals. This hour shows how to read your plant's data, weigh trade-offs, and make smarter dose decisions that protect performance and cut costs.
Approved in Tennessee
View courseFlow Splitting: Why One Tank Fails First
When parallel tanks get unequal flow, one fails while the others coast. This hour covers how flow-splitting structures and weirs go wrong, how to spot an uneven split, and how to correct it.
Approved in Tennessee
View courseThe Combined Wastestream Formula
Misunderstanding how dilution and production limits work can cause permit violations in industrial pretreatment programs. This hour explains the Combined Wastestream Formula so you can correctly calculate discharge limits and explain dilution rules to industrial users and coordinators.
Approved in Tennessee
View courseThe Storm Variables That Are Not Flow
Storms change more than flow, and the other variables can upset a plant too. For experienced operators, this hour covers the storm variables that are not flow, the levers you can adjust, their tradeoffs, how things fail, and making the call in wet weather.
Approved in Tennessee
View courseDrives and Alignment: Which Job Is Yours
Mixing up close-coupled and split-shaft drives or mismanaging shear pins can cause unexpected pump failures and downtime. This hour shows how to identify drive types, perform proper alignment, manage protection devices, and make safe maintenance decisions.
Approved in Tennessee
View courseSigns and Tags: What They Legally Mean
Operators sometimes confuse signs and tags or misuse lockout/tagout tags, leading to safety risks and regulatory problems. This hour explains the legal differences, common mistakes, and how to correctly apply signs and tags to keep your plant safe and compliant.
Approved in Tennessee
View courseDuplicates, Spikes and Blanks
Mistakes in lab results often come from misunderstanding duplicates, spikes, and blanks used for quality control, leading to inaccurate data and permit problems. This hour shows how to read and use these checks correctly, fix common errors, and handle records the right way.
Approved in Tennessee
View courseThree Field Checks on a Weir or Flume
A weir or flume can read wrong for reasons you can check in the field. This hour covers three field checks for measuring flow over a weir or flume, the common errors that throw it off, and why they matter for wet-weather reporting.
Approved in Tennessee
View coursePond Upsets: Low DO, Odor and Turnover
Facultative ponds go wrong in predictable ways: oxygen crashes, odor and seasonal turnover. This hour covers recognizing each early and the safe, practical responses that respect what the pond was designed to do.
Approved in Tennessee
View courseFilamentous Bulking: Cause, Cure and Mistakes
When filaments take over, settling fails and solids head for the effluent. This hour covers what causes bulking, the cures that work, and the common mistakes that make it worse or only hide it.
Approved in Tennessee
View courseWet Weather at the Headworks: Grit and Screens
In a storm the headworks takes the hit first: screens blind and grit floods in. This hour covers running screens and grit removal through high flows so the rest of the plant stays protected.
Approved in Tennessee
View courseWriting the Wet Weather Operating Plan
When the storm arrives is too late to decide who does what. This hour covers writing a wet-weather operating plan for your own treatment processes that meets what regulators expect and that your crew can actually follow.
Approved in Tennessee
View courseWasting Rate, Sludge Age and the F/M Lever
Operators often struggle to balance wasting rate, sludge age, and the food-to-microorganism (F/M) ratio, leading to unstable or inefficient treatment. This hour shows how to use these levers to understand process targets and make confident adjustments for better plant performance.
Approved in Tennessee
View courseWhen a User Claims Upset: Judging the Defence
Industrial users sometimes claim upset or bypass defences to avoid penalties, but many of these claims don't meet federal rules. This course helps operators spot when a user's claim is valid, what to look for in their paperwork, and how to respond correctly.
Approved in Tennessee
View courseDewatering: Choosing the Route, Reading the Belt
Send sludge down the wrong dewatering route, or misread the belt press, and the plant pays for it. This hour covers choosing a dewatering route and reading and adjusting a belt filter press so it runs well.
Approved in Tennessee
View courseWhen the Control System Cannot Be Trusted
Control system data can be wrong or misleading during failures or cyber incidents, putting plant safety at risk. This hour shows how to spot unreliable data, use backup controls, and follow the right steps to keep the plant running safely when the system can't be trusted.
Approved in Tennessee
View courseComing soon (36) - not open for enrollment yet
These are written and approved or being approved, and still in our final review. Get an email when they open.
Maintenance Chemicals: Grout, Paint and Fuel
Workers sometimes handle grout, paint, or fuel without recognizing the chemical hazards or following proper safety rules, which can lead to exposure and regulatory trouble. This hour helps you identify hazards, use the right protective gear, and follow safety and compliance steps during maintenance tasks.
Not offered
DetailsRespond or Evacuate: The HAZWOPER Choice
Confusion over when to handle hazardous spills in-house or evacuate can put employees at risk and violate safety rules. This hour shows how to recognize the right response under OSHA's HAZWOPER standard and what protective gear and steps to follow during emergencies.
Not offered
DetailsMotors, Nameplates and the Power Bill
Motors run the plant's equipment, and they show up on the power bill. This hour covers motor basics, reading a nameplate, how electrical energy is distributed through the plant, and using thermal detection safely, to support reliability and energy-efficiency decisions.
Not offered
DetailsHazard Communication at a Treatment Plant
Every chemical on site comes with a label and a safety data sheet you're expected to understand. This hour covers what the hazard communication rules require, reading an SDS, labeling, and the protective equipment each hazard calls for.
Not offered
DetailsActivated Sludge: Advanced Process Control
Troubles with treatment processes often come from misreading key indicators like sludge levels or oxygen readings, leading to wrong adjustments that hurt plant stability. This hour shows how to interpret critical data, diagnose common faults, and use control levers to keep the plant running steady and efficient.
Not offered
DetailsPrimary Clarifiers: Withdrawal Rate and Septicity
Pump sludge out of the primary too slowly and it turns septic; pump it too fast and you send water to the digester. This hour covers setting the withdrawal rate and protecting the processes downstream.
Approved
DetailsTreatment Process Fundamentals
One connected hour on how a plant works, from headworks and primary clarifiers through activated sludge, secondary clarifiers, nitrification and disinfection. It covers what each stage does to the next, so a decision in one place doesn't cause a problem downstream.
Not offered
DetailsRounding for Compliance: One Rule, Three Errors
Incorrect rounding and arithmetic errors can cause your compliance reports to show violations when there aren't any. This hour explains the rounding rule and common mistakes, so you can calculate and report your data accurately every time.
Not offered
DetailsCan You Still Reach It? Shutoffs, Air and Intakes
In a chemical release, an emergency plan only works if the shutoff can be reached, the air intakes don't pull the gas indoors, and the safety equipment isn't inside the hazard. This hour shows how to check your plant for all three.
Not offered
DetailsWelding and Hot Work: The Fume You Did Not Choose
Welding and hot work can create invisible fumes and gases like ozone or phosgene that put workers at risk and cause safety problems at the plant. This hour shows how to spot these hazards, handle gases safely, and follow proper ventilation and fire-watch steps.
Not offered
DetailsClassifying Trench Soil: Two Tests, Five Traps
Misclassifying trench soil can lead to unsafe excavations and trench collapses, risking serious injury and plant damage. This hour shows how to identify soil types correctly using two tests, spot common mistakes, and follow OSHA rules to keep trenches safe.
Not offered
DetailsPermit-Required Confined Space Entry
Wet wells, manholes and tanks are where operators die, and too often it is the person who goes in to help. This hour covers the permit, atmospheric testing (especially hydrogen sulfide), the rules, and planning the rescue before anyone enters.
Not offered
DetailsDigester Gas: CO2, Burners and Stray Methane
Poor gas quality, a neglected burner or methane where it should not be can each turn a digester into a hazard. This hour covers managing digester gas quality, keeping burners safe and maintained, and handling stray methane.
Not offered
DetailsIntroduction to Wastewater: Sources, Treatment
A plain-language starting point: where wastewater comes from, how a plant treats it, what a permit asks of the plant, and the basics of staying safe on the job. Useful for new operators and for anyone who wants the whole picture in one hour.
Not offered
DetailsWastewater Operator Safety
The hazards that kill operators: confined spaces, hydrogen sulfide and other bad atmospheres, stored energy, chemicals and biological exposure. This hour covers how to recognize and control each, the right protective equipment, and why would-be rescuers are so often the second victim.
Not offered
DetailsHazard Assessment: What Changes the Answer
Choosing the wrong respiratory protection or PPE in confined spaces can put operators at serious risk, especially with changing conditions and H2S levels. This hour explains how to assess hazards carefully and pick the right safety gear and actions for real-world plant situations.
Not offered
DetailsFire Extinguishers
Many plants mix up who needs fire extinguisher training versus just basic education, leading to compliance problems and safety risks. This hour shows how to spot those mistakes, understand regulations, and make sure your plant's policies keep everyone safe and follow the rules.
Not offered
DetailsThe Safety Training Calendar: What Repeats
Operators often miss or confuse safety training deadlines, risking noncompliance and unsafe work conditions. This hour explains how to track required training intervals, spot common scheduling mistakes, and understand when extra training is needed after safety events.
Not offered
DetailsTrench Safety for Plant Crews: The 5-Foot Myth
Many crews believe trenches under 5 feet deep don't need special safety measures, but this can lead to dangerous accidents. This hour shows what OSHA really requires, how to spot hazards, and the right steps to keep your team safe around any trench.
Not offered
DetailsThe Sample Decides It: Bottles and Devices
Using the wrong sample bottles or devices can mess up test results and lead to bad treatment decisions. This hour shows how to choose the right containers, preserve samples properly, handle chlorine tests, and spot lab errors for reliable, permit-compliant data.
Approved
DetailsWho May Touch It: The Electrical Boundary
Operators sometimes take on electrical tasks without knowing where the legal and safety lines are, risking injury or code violations. This hour explains what electrical work operators can safely perform, how to spot when to call an electrician, and key daily safety checks.
Not offered
DetailsThe Operating Point: Reading a Pump Curve
A pump does not run wherever you want it to; it runs where its curve meets your system's. This hour covers reading pump curves, how pump and system interact, pump types, common operating mistakes, and finding the operating point and efficiency.
Approved
DetailsActivated Sludge Modes: What Each One Buys
Operators often face unexpected changes in plant performance when switching activated sludge modes without fully understanding each mode's impact. This hour shows how to read and adjust control settings for different modes to balance capacity, energy use, sludge handling, and effluent quality.
Not offered
DetailsWorking Over Water: Jackets, Buoys and Rescue
Operators working on lagoons often miss key safety rules about life jackets and rescue gear, leading to dangerous situations over water. This hour explains what gear is required, clears up common safety myths, and shows how to choose and use lifesaving equipment correctly.
Not offered
DetailsChlorine Release: Detection, Kit and First Moves
Chlorine leaks can pose serious dangers if not detected quickly or if emergency kits are misused, putting people and the plant at risk. This hour shows how to spot leaks safely, use response kits correctly, and decide when to act or evacuate for everyone's safety.
Not offered
DetailsImpellers, Packing and the Pump That Fights You
Pumps that run hot, leak, or wear out quickly often have the wrong impeller, bad packing care, or misaligned shafts and pipes. This hour shows how to spot these problems, maintain packing and impellers right, and keep pumps running smoothly and efficiently.
Not offered
DetailsNitrification: Alkalinity, Cold and Sludge Age
Nitrification is fragile, and three things commonly knock it out: alkalinity runs out, the water gets cold, or the sludge age is too short. This hour covers watching each one and protecting the process when conditions turn.
Not offered
DetailsDisinfection CT: Contact Time Is Not Volume/Flow
Tank volume divided by flow can overstate your real contact time, because water short-circuits through the tank. This hour shows what actually sets contact time and how to judge whether your disinfection is really working.
Not offered
DetailsChemical Delivery and Incompatible Storage
A delivery put into the wrong tank, or incompatible chemicals stored side by side, can set off a dangerous reaction. This hour covers handling deliveries and storage safely, recognizing and preventing incompatible reactions, and responding to a mishandling or release.
Not offered
DetailsCavitation, Suction Lift and Priming
Pumps can suffer serious damage from cavitation, suction lift problems, or improper priming, leading to costly repairs and downtime. This hour shows how to spot early warning signs, keep pumps primed correctly, and use maintenance steps to protect your equipment.
Not offered
DetailsEngulfment, Not Gas: Two Fatal Case Studies
Two operators drowned despite passing gas tests because they were engulfed by solids in a confined space. This hour shows how to spot and avoid engulfment hazards, make safer entry decisions, and improve communication and rescue actions beyond just gas monitoring.
Not offered
DetailsThe Baffle That Works and the One That Does Not
Wet weather can overload clarifiers, causing solids to wash out and harm biological treatment. This hour shows how to recognize clarifier limits, understand baffle types, and make smart choices to keep treatment effective during heavy flows.
Submitted
DetailsConfined Space Rescue: Why Rescuers Die Too
Many confined-space deaths are would-be rescuers who went in after the first victim. This hour covers why that happens and the non-entry rescue methods that bring people out without adding a second victim.
Not offered
DetailsHarness, Anchor, Hook: What Fails and Why
Falls from heights at wastewater plants often happen because of using the wrong harness, anchor, or lanyard, or missing key safety checks. This hour shows how to pick the right fall protection gear, spot common mistakes, and follow OSHA rules to keep yourself safe.
Not offered
DetailsRespirators: Hazard Assessment and IDLH
The wrong respirator in the wrong atmosphere is worse than none, because it feels safe. This hour covers assessing a respiratory hazard, recognizing an atmosphere that is immediately dangerous to life (IDLH), and choosing and using the right protection.
Not offered
DetailsLadders at a Plant: Portable, Fixed, and 2036
Falls from ladders are a real risk at a plant, and fixed ladders come with a 2036 deadline. This hour covers the rules and safe practice for portable and fixed ladders, what that deadline means, and the habits that prevent falls.
Not offered
DetailsOther states
We publish a page for every state so you can see exactly where each course stands. Browse the full catalog.